Dealers, garages and vehicle finance

Click Fraud Protection for Car Dealerships, Garages and Vehicle Finance

Click fraud protection for car dealerships and garages is software that scores every paid click on a motor trade firm's Google Ads and Microsoft Ads for signs of invalid traffic and, on Google Ads, automatically excludes the sources that keep coming back: repeat clickers, bots, data centres and VPNs. Most automotive clicks are cheap, so the damage is volume, not price. Across all the advertisers in our latest benchmark, 9% of paid clicks showed a warning sign.

  • Dedicated support team
  • 5 minute setup
  • Cancel anytime

Last updated . Reviewed by Dan Slay, founder.

UK cost per click, automotive searches

  • Car finance$5.00 per click
  • Sell my car$3.00 per click
  • Mot$1.40 per click
  • Used cars$0.20 per click

Average cost per click. Source: Ahrefs, UK searches, checked 18 November 2026. Prices in US dollars. The full table is further down.

October 2026 benchmark

How much click fraud do automotive advertisers see?

  • 9%of paid clicks across all industries showed a warning sign
  • 14%or more, for the worst-hit 1 in 10 advertisers in any industry

October 2026 benchmark: paid clicks on Google Ads and Microsoft Ads over 91 days, 22 July to 20 October 2026.

Across all the advertisers in our latest benchmark (the October 2026 benchmark), 9% of paid clicks showed a warning sign. We don't report automotive separately. The industry table lists the sectors we do report.

Until we report automotive on its own, treat 9% as a starting point and the flagged clicks in your own account as the answer. A 7-day free trial is long enough to see them.

A warning sign means the click came from a cloud data centre, a commercial VPN or proxy, or Tor, showed clear signs of automation, or was one of three or more clicks on the same advertiser's ads from one IP address in a day. It is a flag and not a verdict, and the benchmark method sets out what is counted.

Two limits on the figure. We can't see which clicks Google or Microsoft refunded later. And every advertiser in the benchmark chose ClickGuardian, so treat it as a benchmark for protected accounts and not an average for every advertiser.

Cost per click

What do automotive clicks cost in the UK?

Stock searches are among the cheapest clicks in the table, and finance searches cost about 25 times as much: $0.20 for used cars against $5.00 for car finance. These are the average UK costs per click for 11 common searches.

SearchAverage cost per click
car finance$5.00
sell my car$3.00
car servicing$1.60
van leasing$1.50
mot$1.40
clutch replacement$1.00
car body repair$0.80
car leasing$0.70
used cars$0.20
used vans for sale$0.20
used trucks for sale$0.15

Source: Ahrefs, UK searches, checked 18 November 2026. Prices in US dollars.

A worked example. A dealer spends $3,000 a month on used cars searches at $0.20 a click, which buys about 15,000 clicks. At the all-industry rate of 9%, about 1,350 of those clicks carry a warning sign. That is $270 a month and $3,240 a year. The bill is small. The cost is 1,350 visits that can each put a junk enquiry in front of the sales team.

The same $3,000 spent on car finance searches at $5.00 a click buys about 600 clicks, and about 54 of them carry a warning sign. The money at risk is the same, $270 a month, but it sits in 54 clicks instead of 1,350. For a broker each bad click matters. For a dealer the pile of them does.

Why are automotive ads a target?

Automotive advertising has four features that draw clicks with no buyer behind them. None is a claim about how often it happens. For that, use the benchmark above and the flagged clicks in your own account.

Vehicle finance sits next to regulated lending. For insurance, loans and mortgages, read click fraud protection for financial services.

01

Rival dealers on the same stock searches

Dealers in one town bid on the same searches, such as used cars or used vans for sale, and see each other's ads every day. Checking a rival's price through the ad costs you a click each time, and it shows in the data as repeat clicks from one IP address.

02

Scrapers and stock aggregators

Stock listings publish price, mileage and registration, so scrapers and listing aggregators crawl them. Some arrive through ads, and each automated visit is a paid click.

03

Finance brokers pay per application

Finance and leasing brokers often pay affiliates and lead sellers for each completed application. Payment per form rewards fake applications, which then count as conversions in the account.

04

Spend you can't see placement by placement

Performance Max and vehicle listing ads spread one budget across Search, Shopping, YouTube, Display and partner sites. You can't review each placement the way you can a search keyword, so a poor source can run for weeks.

Car dealerships

How do car dealerships protect Google Ads from click fraud?

Start with the free settings, in this order, then decide whether the volume justifies a tool. A dealer buying 15,000 clicks a month can't review them by hand.

  1. Set location targeting to "Presence". In each campaign's location options, choose "Presence: People in or regularly in your included locations". The default also reaches people who only show interest in your area, and they can't visit the forecourt.
  2. Read the search terms report every week. Add negative keywords for the searches you can't serve, such as parts, manuals, valuations and jobs.
  3. Add the invalid clicks columns. "Invalid clicks" and "Invalid click rate" in the campaigns table show what Google has already filtered and not charged for.
  4. Measure enquiries, not clicks. Track calls, forms and finance applications as conversions, and import the ones that became a sale so Smart Bidding learns from buyers.
  5. Exclude repeat sources by IP address. Google Ads allows 500 IP exclusions per campaign. Performance Max campaigns, which carry vehicle listing ads, take exclusions at account level only.
  6. Add a click fraud tool. ClickGuardian scores every paid click and adds bad sources to your exclusions automatically, so the list is kept up without anyone exporting IP addresses by hand.
Van and truck dealers

What is the best way to stop invalid clicks for a van and truck dealer?

The same two steps, tightened for a smaller market: fix targeting first, then exclude the sources that repeat. Van and truck stock searches are the cheapest in the table, at $0.20 for used vans for sale and $0.15 for used trucks for sale, so no single click matters. The pattern does.

Commercial vehicle buyers are businesses, so real enquiries tend to arrive in working hours from office and mobile networks. A click from a cloud data centre, or a burst of clicks overnight on a stock search, stands out on an account this size. Van leasing is the exception at $1.50 a click: treat it like the finance searches further down.

With clicks this cheap, the scarce resource is the 500 IP exclusions each campaign allows. ClickGuardian keeps the most serious blocks on the list and replaces the weakest one only for a stronger threat, so a full list doesn't stop new sources being excluded.

Garages and repair centres

Do garages and repair centres need click fraud protection?

Not always. A garage spending a few hundred pounds a month on local searches should fix its settings first, and many will find that is enough. Garage clicks sit in the middle of the table: $1.60 for car servicing, $1.40 for mot, $1.00 for clutch replacement and $0.80 for car body repair.

Garages serve a small radius, so the two settings that matter most are "Presence" location targeting and an ad schedule that matches opening hours. A click from 80 miles away, or at 3am when nobody answers the phone, rarely becomes a booking, whoever made it.

Protection earns its place when the same sources keep coming back: three or more clicks a day from one IP address on your MOT or servicing ads, with no call and no booking. That is a warning sign in our benchmark, and it is what ClickGuardian excludes automatically. The Starter plan costs $49 a month and covers up to $6,000 of ad spend, so put your own budget through the calculator before you decide.

Car finance and leasing brokers

How do car finance and leasing brokers stop click fraud on Google Ads?

By protecting the application form as well as the click. Car finance is the dearest search in the table at $5.00 a click, and a broker who buys applications from affiliates pays again for each completed form.

Count approved applications as the conversion, not form starts, and import them into Google Ads as offline conversions so Smart Bidding stops learning from fake ones. Ask each affiliate or lead seller where every application's click came from, and stop paying for sources that send forms completed in a few seconds.

ClickGuardian scores each paid click, adds bad sources to your Google Ads exclusions automatically and scores each application form from 0 to 100 (beta) next to the click that produced it. It reports the score. It doesn't filter or block an application. Brokers arranging regulated credit can read click fraud protection for financial services for the compliance questions.

The solution

What does ClickGuardian do for automotive campaigns?

Google Ads allows 500 IP exclusions per campaign. When a campaign's list is full, ClickGuardian keeps the most serious blocks and replaces the weakest one only for a stronger threat. Blocks you add by hand are never removed automatically.

Built for volume

A dealer can buy thousands of clicks a month at $0.20 each. Every one gets a quality score from 0 to 100 and a reason, so you review the flagged few and not the whole list.

Performance Max and vehicle listing ads

Performance Max campaigns can't take campaign-level IP exclusions. ClickGuardian adds flagged sources to the account-level list, which Performance Max respects, vehicle listing ads included.

Enquiry and application scoring (beta)

Each enquiry or finance application form is scored from 0 to 100 and reported next to the click that produced it. It is in beta: it scores and reports, and doesn't filter or block a lead.

Microsoft Ads tracking from Professional

Microsoft Ads clicks are tracked in real time from the Professional plan (1 account on Professional, 3 on Growth and unlimited on Scale). Microsoft's API doesn't allow automatic IP exclusions, so you get a ranked list to apply yourself.

Automatic Google Ads exclusions

When a source is flagged, ClickGuardian adds it to your Google Ads exclusions automatically. It has to see a click before it can block the source, so the first click from a new bad source is usually still charged. At $0.20 a click that first one is cheap. The repeats are what add up.

Honest limits

What can't it do?

Six limits, so you can judge it properly before the 7-day free trial starts.

  • The first click from a new bad source is usually still charged. ClickGuardian has to see a click before it can exclude the source.
  • Microsoft Ads is not blocked in real time. Clicks are tracked as they happen, from the Professional plan, and you apply the exclusions from a ranked list.
  • Meta Ads protection is in closed beta and not generally available.
  • Fake lead detection is in beta. It scores form submissions from 0 to 100 and reports them. It doesn't filter or remove a lead.
  • Forms filled inside a Google lead form asset never reach your site, so no site-side tool can see them, ours included.
  • It can't see inside a third-party marketplace or finance portal. If the enquiry form sits on another company's site, the click and the form never reach yours.

How much could suspect clicks be costing your dealership or garage?

The calculator opens on the all-industry rate from our October 2026 benchmark, 9%. Change the spend and cost per click to your own: the table above has the UK averages.

Ad spend calculator

How much is click fraud costing you?

$
$

Approx. across all industries: US average, WordStream 2026. Change it if you know yours.

9%

Drag to set your own rate, or pick an industry above.

Across all industries, 9% of paid clicks showed warning signs in our October 2026 benchmark.

Without protection, you spend

$180/mo

on clicks with warning signs. About 33 clicks a month, or $2,160 a year.

You vs other advertisers, at your spend
You, at 9% $180
Typical, 8% $160
Worst 1 in 10, 14%+ $280+

With ClickGuardian

ClickGuardian Starter plan $49/mo
Potential saving $131/mo

3.7x your plan cost. Plan matched to your spend; figures are before any refunds from Google or Microsoft.

Start free trial
FAQ

Frequently Asked Questions

Common questions from dealers, garages and vehicle finance brokers that run paid search.

What is click fraud protection for car dealerships running Google Ads?

It is software that scores each paid click and excludes the sources that keep coming back. For a dealership the gain is fewer junk enquiries: a used cars click costs about $0.20, so the sales time wasted on a fake enquiry costs more than the click. Across all the advertisers in our latest benchmark, 9% of paid clicks showed a warning sign.

What is the best click fraud protection for car garages and repair centres on Google Ads?

For most garages the best first step is free: "Presence" location targeting and an ad schedule that matches opening hours. A paid tool earns its place when the same sources keep clicking your MOT or servicing ads without booking. ClickGuardian's Starter plan is $49 a month, with a 7-day free trial and a card required at sign-up.

How do car finance and leasing brokers stop click fraud on Google Ads?

By protecting the application form as well as the click. Count approved applications as the conversion, import them into Google Ads so Smart Bidding stops learning from fake ones, and exclude the sources that repeat. Car finance averages $5.00 a click in the UK, so each bad click is a real cost.

What is the best tool to stop invalid clicks for a van and truck dealer on Google Ads?

One that copes with volume and manages the exclusion list for you. Van and truck stock clicks cost $0.20 or less, so the job is spotting repeat sources among thousands of clicks, and Google Ads allows only 500 IP exclusions per campaign. ClickGuardian adds bad sources automatically and keeps the most serious blocks when a list is full.

Are cheap automotive clicks worth protecting?

Yes, when you buy a lot of them. $3,000 a month at $0.20 a click buys about 15,000 clicks, and at the all-industry rate of 9% about 1,350 of them carry a warning sign. The bill is $270 a month, and the bigger cost is the enquiries your sales team has to work through.

Does ClickGuardian work with Performance Max and vehicle listing ads?

Yes, through account-level exclusions. Performance Max campaigns, which carry vehicle listing ads, can't take campaign-level IP exclusions, so ClickGuardian adds flagged sources to the account-level list those campaigns respect. It has to see a click first, so the first click from a new bad source is usually still charged.

What does click fraud protection cost for a dealership or garage?

Plans start at $49 a month (£39) for 1 website and 1 Google Ads account, with up to $6,000 a month in ad spend. A dealer spending $3,000 a month fits the Starter plan at $49 a month. Every plan has a 7-day free trial, and a card is required at sign-up.
Related industries

Click fraud protection for related industries

● Trusted by 2,000+ businessesProcessing over 11.5 million traffic events a month

See which of your clicks carry a warning sign

ClickGuardian scores every paid click and adds bad sources to your Google Ads exclusions automatically. Setup takes about 5 minutes.

✓ Dedicated support team✓ 5 minute setup✓ Cancel anytime