Manufacturers, fabricators and industrial suppliers

Click Fraud Protection for Manufacturers and Industrial Suppliers

Click fraud protection for manufacturers is software that scores every paid click on a manufacturer's or industrial supplier's Google Ads and Microsoft Ads for signs of invalid traffic and, on Google Ads, automatically excludes the sources that keep coming back: repeat clickers, bots, data centres and VPNs. In our October 2026 benchmark, 12.1% of paid clicks on B2B industrial, trade and manufacturing ads showed a warning sign, against 9% across all industries.

  • Dedicated support team
  • 5 minute setup
  • Cancel anytime

Last updated . Reviewed by Dan Slay, founder.

UK cost per click, industrial searches

  • Pallet racking$3.50 per click
  • Plastic injection moulding$3.50 per click
  • Sheet metal fabrication$3.00 per click
  • Steel fabrication$3.00 per click

Average cost per click. Source: Ahrefs, UK searches, checked 18 November 2026. Prices in US dollars. The full table is further down.

October 2026 benchmark

How much click fraud do manufacturing advertisers see?

  • 12.1%of paid clicks on B2B industrial, trade and manufacturing ads showed a warning sign
  • 9%of paid clicks across all industries showed a warning sign
  • 14%or more, for the worst-hit 1 in 10 advertisers in any industry

October 2026 benchmark: paid clicks on Google Ads and Microsoft Ads over 91 days, 22 July to 20 October 2026.

In our October 2026 benchmark, 12.1% of paid clicks on B2B industrial, trade and manufacturing ads showed a warning sign, against 9% across all industries. That puts the group above the all-industry figure. The full industry table shows where it sits.

The group covers manufacturers, industrial suppliers and trade distributors together. We don't split it further, so read 12.1% as the rate for B2B industrial advertisers as a whole and not for one process such as moulding or fabrication.

A warning sign means the click came from a cloud data centre, a commercial VPN or proxy, or Tor, showed clear signs of automation, or was one of three or more clicks on the same advertiser's ads from one IP address in a day. It is a flag and not a verdict, and the benchmark method sets out what is counted.

Two limits on the figure. We can't see which clicks Google or Microsoft refunded later. And every advertiser in the benchmark chose ClickGuardian, so treat it as a benchmark for protected accounts and not an average for every advertiser.

Cost per click

What do manufacturing and industrial clicks cost in the UK?

Industrial searches cost less per click than legal or financial ones, and each has a small audience made up mostly of other businesses. These are the average UK costs per click for 10 common searches.

SearchAverage cost per click
pallet racking$3.50
plastic injection moulding$3.50
sheet metal fabrication$3.00
steel fabrication$3.00
conveyor systems$3.00
industrial doors$2.00
industrial flooring$2.00
compressed air systems$1.70
laser cutting services$1.50
cnc machining$0.90

Source: Ahrefs, UK searches, checked 18 November 2026. Prices in US dollars.

A worked example. A racking supplier spends $4,000 a month on pallet racking searches at $3.50 a click, which buys about 1,143 clicks. At the B2B industrial, trade and manufacturing rate of 12.1%, about 138 of those clicks carry a warning sign. That is $484 a month and $5,808 a year spent on clicks that deserve a second look.

The click cost is the smaller part. Every junk quote request that follows a bad click also takes an estimator's time to open, price and chase.

Why are manufacturing and industrial ads a target?

None of these reasons depends on anyone singling out factories. They come from how industrial buying works: a few niche searches, a few bidders on each, a quote form on every landing page and weeks between the click and the order.

If you buy or sell enquiries instead of making things, read click fraud protection for lead generation, which covers pay-per-lead models.

01

A bad click is found late

A quote can take weeks to become an order or a dead end. By the time sales marks an enquiry as junk, the campaign that produced it has had weeks to buy more clicks from the same source.

02

Quote forms attract scripts

A request-for-quote form with a file upload and a free-text box is an easy target for automated submissions. They arrive seconds after the ad click and count as conversions unless you filter them out.

03

A small set of rivals

Only a handful of firms bid on a search such as sheet metal fabrication or conveyor systems. With so few bidders the same sources come back, so repeat clicks from one IP address are the pattern to watch.

04

Overseas suppliers and sourcing agents

Suppliers and sourcing agents abroad click UK ads to pitch their own services through your enquiry form. You pay for the click, and the "enquiry" is a sales email with no intent to buy.

05

Smart Bidding learns from junk

Smart Bidding optimises towards whatever you count as a conversion. If a junk form fill counts, bidding is trained to find more visitors like the one who sent it.

Junk leads

Industrial supplier getting junk leads from Google Ads: could it be bots?

Sometimes, yes. Bots are one of three common causes, alongside overseas suppliers pitching through your form and real people who searched for something you don't sell. Three checks tell them apart.

  • The same IP ranges. Log the IP address with each form submission. Junk that comes from a few address ranges, or from cloud data centres, points to automation. Real buyers arrive from office and mobile networks spread across the country.
  • Forms filled seconds after the click. A buyer reads the page before asking for a quote. A form completed within a few seconds of the ad click, with every field filled, was almost certainly filled by a script.
  • Enquiries from outside your delivery area. A fabricator that delivers within 100 miles shouldn't get quote requests from another continent. These usually mean a location setting is too loose, not that a bot is involved.

Then work through these steps in order. The first five use free Google Ads settings and your own form.

  1. Set location targeting to "Presence". In each campaign's location options, choose "Presence: People in or regularly in your included locations". The default also reaches people who only show interest in your area, which lets overseas clicks through.
  2. Read the search terms report every week. Add negative keywords for jobs, courses, definitions and hobby searches, such as "cnc machining jobs" or "what is injection moulding".
  3. Count only qualified enquiries as conversions. Import the enquiries your sales team accepted as offline conversions, so Smart Bidding learns from requests that became quotes and not from every form fill.
  4. Protect the quote form. Add a hidden honeypot field and server-side validation, and record the IP address and the time taken for each submission.
  5. Exclude the worst sources by IP address. Google Ads allows 500 IP exclusions per campaign. Add the addresses and ranges behind repeat junk. Performance Max campaigns take exclusions at account level only.
  6. Add a click fraud tool. ClickGuardian scores every paid click, adds bad sources to your Google Ads exclusions automatically and keeps each 500-address list filled with the most serious blocks. It also scores each form submission from 0 to 100 (beta), so sales can see which quote requests came from a suspect click.
The solution

What does ClickGuardian do for manufacturing and industrial campaigns?

Google Ads allows 500 IP exclusions per campaign. When a campaign's list is full, ClickGuardian keeps the most serious blocks and replaces the weakest one only for a stronger threat. Blocks you add by hand are never removed automatically.

A score and a reason for every click

Each paid click gets a quality score from 0 to 100 and the reasons behind it, such as a data centre address, a VPN, or three clicks from one IP address in a day. On a niche search you can read every flagged click.

Quote request scoring (beta)

Each quote form submission is scored from 0 to 100 and reported next to the click that produced it, so an estimator can see which requests came from a suspect source before pricing them. It is in beta: it scores and reports, and doesn't filter or block a lead.

Country and source controls

Block by country is on every plan, which suits a supplier that only delivers in the UK. Custom block rules and campaign exclusions start on the Professional plan.

Microsoft Ads tracking from Professional

Many office PCs open Microsoft Edge with Bing as the search engine, so B2B campaigns often run on Microsoft Ads too. Clicks there are tracked in real time (1 account on Professional, 3 on Growth and unlimited on Scale). Microsoft's API doesn't allow automatic IP exclusions, so you get a ranked list to apply yourself.

Automatic Google Ads exclusions

When a source is flagged, ClickGuardian adds it to your Google Ads exclusions automatically, including the account-level list that Performance Max respects. It has to see a click before it can block the source, so the first click from a new bad source is usually still charged.

Honest limits

What can't it do?

Six limits, so you can judge it properly before the 7-day free trial starts.

  • The first click from a new bad source is usually still charged. ClickGuardian has to see a click before it can exclude the source.
  • Microsoft Ads is not blocked in real time. Clicks are tracked as they happen, from the Professional plan, and you apply the exclusions from a ranked list.
  • Meta Ads protection is in closed beta and not generally available.
  • Fake lead detection is in beta. It scores form submissions from 0 to 100 and reports them. It doesn't filter or remove a lead.
  • Forms filled inside a Google lead form asset never reach your site, so no site-side tool can see them, ours included.
  • It can't tell you whether a real buyer is a good fit. An enquiry for a process you don't offer is a targeting problem, and the fix is in your search terms and negative keywords.

How much could suspect clicks be costing your industrial campaigns?

The calculator opens on the B2B industrial, trade and manufacturing figure from our October 2026 benchmark, 12.1%, which its slider rounds to 12%. Change the spend and cost per click to your own.

Ad spend calculator

How much is click fraud costing you?

$
$

Approx. for industrial & commercial: US average, WordStream 2026. Change it if you know yours.

12%

Drag to set your own rate, or pick an industry above.

B2B industrial, trade and manufacturing: 12.1% of paid clicks showed warning signs in our October 2026 benchmark.

Without protection, you spend

$240/mo

on clicks with warning signs. About 41 clicks a month, or $2,880 a year.

You vs other advertisers, at your spend
You, at 12% $240
Typical, 8% $160
Worst 1 in 10, 14%+ $280+

With ClickGuardian

ClickGuardian Starter plan $49/mo
Potential saving $191/mo

4.9x your plan cost. Plan matched to your spend; figures are before any refunds from Google or Microsoft.

Start free trial
FAQ

Frequently Asked Questions

Common questions from manufacturers, fabricators and industrial suppliers that run paid search.

Do B2B manufacturers advertising on Google Ads need click fraud protection?

Most should at least measure it. In our October 2026 benchmark, 12.1% of paid clicks on B2B industrial, trade and manufacturing ads showed a warning sign, against 9% across all industries. Niche industrial searches have only a handful of bidders, so the same suspect sources tend to come back, and a 7-day free trial is long enough to see whether yours do.

Industrial supplier getting junk leads from Google Ads: could it be bots?

Yes, it could be, but bots are one of three common causes. Automated submissions show up as forms completed seconds after the ad click, from a small set of IP ranges. Overseas suppliers pitching through your quote form and location targeting that is too loose also produce junk, and each needs a different fix.

How can I tell a bot enquiry from a real quote request?

Look at timing, source and content. A bot fills every field within seconds of the click, often from a cloud data centre address, and repeats the same text across submissions. A real buyer takes minutes, arrives from an office or mobile network, and names a part, a quantity or a drawing.

Why do junk enquiries make a Google Ads campaign worse over time?

Because Smart Bidding treats every counted conversion as a success. If a junk quote request counts as a conversion, bidding looks for more visitors like the one that sent it. Counting only the enquiries your sales team accepted, through offline conversion imports, stops the campaign learning from junk.

How many IP addresses can a manufacturer exclude in Google Ads?

Up to 500 per campaign, the same as any other advertiser. Performance Max campaigns take IP exclusions at account level only. When a campaign's list is full, ClickGuardian keeps the most serious blocks and replaces the weakest one only for a stronger threat.

Does ClickGuardian cover Microsoft Ads for industrial campaigns?

Yes, from the Professional plan at $99 a month, with 1 account on Professional, 3 on Growth and unlimited on Scale. Microsoft Ads clicks are tracked in real time, but Microsoft's API doesn't allow automatic IP exclusions. You get a ranked list of sources to exclude yourself.

What does click fraud protection cost for a manufacturer?

Plans start at $49 a month (£39) for 1 website and 1 Google Ads account, with up to $6,000 a month in ad spend. A supplier spending $4,000 a month fits the Starter plan at $49 a month. Every plan has a 7-day free trial, and a card is required at sign-up.
Related industries

Click fraud protection for related industries

● Trusted by 2,000+ businessesProcessing over 11.5 million traffic events a month

See which of your clicks carry a warning sign

ClickGuardian scores every paid click and adds bad sources to your Google Ads exclusions automatically. Setup takes about 5 minutes.

✓ Dedicated support team✓ 5 minute setup✓ Cancel anytime